N Male for 1/2" Heliax FSJ4-50B 50 Ohm RF Transmission Cable

F4NMV2-C is a Type N male for 1/2" Heliax type FSJ4-50B (Superflex) 50 Ohm RF Transmission cable. For standard 1/2" cable use P/N NM-LCF12-C02. Nemal stocks a complete line of Type N, UHF, DIN, and EIA connectors for 1/2", 7/8", and 1-1/4" Andrews amd RFS Cablewave hardline

General Specifications
Interface	N Male
Body Style	Straight
Brand	HELIAX®
Mounting Angle	Straight
Electrical Specifications
Connector Impedance	50 ohm
Operating Frequency Band	0 – 12000 MHz
Cable Impedance	50 ohm
3rd Order IMD, typical	-120 dBm @ 910 MHz
3rd Order IMD Test Method	Two +43 dBm carriers
RF Operating Voltage, maximum (vrms)	707.00 V
dc Test Voltage	2000 V
Outer Contact Resistance, maximum	0.30 mOhm
Inner Contact Resistance, maximum	2.00 mOhm
Insulation Resistance, minimum	5000 MOhm
Average Power	0.6 kW @ 900 MHz
Peak Power, maximum	10.00 kW
Insertion Loss, typical	0.05 dB
Shielding Effectiveness	-110 dB
Outline Drawing
Click on image below to enlarge.
Mechanical Specifications
Outer Contact Attachment Method	Crush-flare
Inner Contact Attachment Method	Captivated
Outer Contact Plating	Unplated
Inner Contact Plating	Silver
Attachment Durability	25 cycles
Interface Durability	500 cycles
Interface Durability Method	IEC 61169-16:9.5
Connector Retention Tensile Force	890 N   |   200 lbf
Connector Retention Torque	5.42 N-m   |   48.00 in lb
Insertion Force	66.72 N   |   15.00 lbf
Insertion Force Method	MIL-C-39012C-3.12, 4.6.9
Pressurizable	No
Coupling Nut Proof Torque	4.52 N-m   |   40.00 in lb
Coupling Nut Retention Force	444.82 N   |   100.00 lbf
Coupling Nut Retention Force Method	MIL-C-39012C-3.25, 4.6.22
Dimensions
Nominal Size	1/2 in
Diameter	23.62 mm   |   0.93 in
Length	53.98 mm   |   2.13 in
Weight	90.72 g   |   0.20 lb
Environmental Specifications
Operating Temperature	-55 °C to +85 °C (-67 °F to +185 °F)
Storage Temperature	-55 °C to +85 °C (-67 °F to +185 °F)
Immersion Depth	1 m
Immersion Test Mating	Mated
Immersion Test Method	IEC 60529:2001, IP68
Water Jetting Test Mating	Mated
Water Jetting Test Method	IEC 60529:2001, IP66
Moisture Resistance Test Method	MIL-STD-202F, Method 106F
Mechanical Shock Test Method	MIL-STD-202F, Method 213B, Test Condition C
Thermal Shock Test Method	MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C
Vibration Test Method	MIL-STD-202F, Method 204D, Test Condition B
Corrosion Test Method	MIL-STD-1344A, Method 1001.1, Test Condition A
Standard Conditions
Attenuation, Ambient Temperature	20 °C   |   68 °F
Average Power, Ambient Temperature	40 °C   |   104 °F

We manufacture custom assemblies, patch cords, and adapters to order, usually within 48 hours.

*These connector series are all available in cable and panel mount plugs and jacks, receptacles, and in-series adapters.