05
Application Tooling
APPLICATION TOOLING
Crimping, stripping, coring and insertion tools
Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required
RF AND MICROWAVE
We design and manufacture RF solutions for broadcast and wireless networks.
Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required
Nemal Electronics stock a wide selection of RF application tools for crimping, stripping, coring and insertion. We have capability to consult your tooling needs and supply them in any quantity. Some you can buy online right here on our website or you can contact us by filling out the form on this page or giving us a call at (800) 522-2253.
Crimping Tools - RF Coaxial Connectors
Tool selection chart
| Tooling Group | Die Part N (Fits CT2000R) | Tool N (Fixed Die) |
| | - | CTF5/CT 6270 |
| 06 | - | CTF4/CT 6270/CT 3150 |
| 08 | - | CTF5/CT 6270/CT 3150 |
| 09 | - | CTF4/CT 6270/CT 3150 |
| 11 | - | CTF11 |
| 13 | CTD 213 | *CTF 3150/CT 6270 |
| 14 | CTD 214 | CT 6270 |
| 23 | CTD 923 | *CT 6270 |
| 26 | CTD 926 | *CT 6270/*CT 3150 |
| 28 | CTD 928 | *CT 3600/CT 6270 |
| 41 | CTD 141 | *CT 6270 |
| 42 | CTD 142 | CT 3155 |
| 56 | CTD 056 | *CT 6270 |
| 57 | CTD 057 | *CT 6270 |
| 58 | CTD 058 | CT 3500/CT 6270/CT |
| 59 | CTD 059 | CT 3500/CT 6270 |
| 61 | CTD 061 | - |
| 74 | CTD 174 | CT 6270/CT 3155 |
| 79 | CTD 179 | *CT 6270 |
| 80 | CTD 180 | CT 6270 |
| 85 | CTD 185 | - |
Crimping Tools - RF Coaxial Connectors
Tool specifications
| Nemal Part Number | Fits Group | Hex Sizes (inches) | Figure Number | Notes |
| BRAID CONTACT | ||||
| CT 3150 | 06*, 08*, 09*, 13* | .2621/.3241/.382 - | 1 | Ratchet - REL |
| CT 3155 | 42, 58, 74 | .128/.115/.178/.213 .042/.068 | 1 | Ratchet - REL |
| CT 3500 | 58, 59 | .213/.255 .069/.100 | 1 | Ratchet - REL |
| CT 3600 | 59, 06, 28 | .255/.324 .069/.100 | 1 | Ratchet - REL |
| CT 3700 | 58, 59, 74, 80 | .78/.213/.255 .052/.068/.100 | 8 | Ratchet - REL |
| CT 6270 | 13, 14, 28, 58, 59, 74, 80 | .128/.178/.384/.429 .213/.255/.324 .068/.098 | 2 | - |
| CT 6270B | 13, 14, 28, 58, 59, 74, 80 | .128/.178/.384/.429 .213/.255/.324 .068/.098 | 3 | Bench Mt. |
| CT 6270R | 13, 14, 28, 58, 59, 74, 80 | .128/.178/.384/.429 .213/.255/.324 .068/.098 | 2 | Ratchet - REL |
| CT 2000R | Uses Interchangeable Dies | 4 | Ratchet - REL |
Crimping Tools
Type F
| Nemal Part Number | Fits Groups | Hex Sizes | Figure Number |
| CTF4 | 06, 09 | .324/.380 | 5 |
| CTF5 | 05, 08 | .260/.420 | 6 |
| CTF11 | 11 | .475/.096 | 5 |
D Subminiature
| Nemal Part Number | Fits Wire Sizes | Figure Number |
| CT1601 | 22-24 Ga. | 8 |
| CT2320* | 20-30 Ga. | 7 |
* Pin holder, locator, Full Ratchet
Stripping Tools
| Nemal Part Number | Application | Figure Number |
| CT 1205 | Rotary .100”-.300” Jacket & Dielectric | 9 |
| CT 1208 | Rotary .100”-.300” Jacket, Dielectric & Braid | 9 |
| CT 1820 | Rotary Jacket Stripper .175-1.00 | 10 |
| CT 1115 | Wire Stripper 16-30 Ga. | 12 |
| ST 1100 | RG11 - Jacket, Braid, Dielectric | 9 |
| ST 5960 | RG59 & RG6 Jacket, Braid, Dielectric | 9 |
| ST 2590* | RG59/8281 Jacket & Dielectric | 11 |
| ST 3590* | RG59 Jacket, Dielectric, Braid | 11 |
| ST 3580* | RG58/62 Jacket, Dielectric, Braid | 11 |
| ST 3820* | Belden 8281 Jacket, Dielectric, Braid | 11 |
* Series stripping tools offer a quick and effective means of stripping coaxial cables. Each tool is factory pre-set and requires no adjustment other than moving the blade to a fresh cutting surface when it becomes dull (approx. 2,000 strips).
Insertion Tools
D Subminiature
| Nemal Part Number | Figure Number |
| CT 250 | 13 |
* Pin holder, locator, Full Ratchet
Coring Tools (75 Ohm Trunkline)
Prepares cable for connector installation
| Nemal Part Number | Application | Figure Number |
| CT 500 | 0.500” Coring/Stripping | 14 |
Cable Tie Installation
Pistol Grip - Applies proper tension to cable tie and cuts flush
| Nemal Part Number | Tie Sizes | Military Reference | Figure Number |
| CT100CAT | CAT4-CAT14 | MS90387 | 15 |
Crimping Tools - Terminal
| Nemal Part Number | Application | Wire Sizes | Figure Number |
| CT 1100 | Cuts, Strips wire, crimps insulated, non-insulated terminals | 10-22 Ga. | 16 |
| CT 1110 | Crimps insulated terminals ratchet | 10-22 Ga. | 8 |
Stripping/Crimping Tools - Telephone
| Nemal Part Number | Application | Cable Sizes | Figure Number |
| CT 1746 | Cuts, strips, crimps flat satin telephone cables to modular plugs | 4-6 conductor | 17 |
| CT 1780 | Cuts, strips, crimps flat satin telephone cables to modular plugs | 8 conductor | 17 |
| CT 1744 | Cuts, strips, crimps flat satin telephone cables to modular plugs | 4 conductor Handset only | 17 |