- Frequency Range: DC-500 MHz
- Impedance: Non-Constant
- Voltage Rating: 500V Peak
- Base Metal: Brass/Die Cast Zinc
- Plating: Silver/Nickel
- Insulator: Phenolic/Teflon
- Mating: 5/8-24 Threaded Coupling
UHF Series Connectors
UHF SERIES CONNECTORS
For RF applications up to 500 MHZ
Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required
RF AND MICROWAVE
We design and manufacture RF solutions for broadcast and wireless networks.
Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required
In addition to our large inventory of standard products, we can design and manufacture UHF Type connectors, adapters, and cable assemblies to your project's specific requirements in either prototype or production quantities. You can purchase the more common varieties on our website or contact us by filling out the form on this page or by giving us a call at (800) 522-2253.
UHF Series Connectors
The term UHF was originally intended for frequencies of between 0.6 to 300MHz, which was considered Ultra high. Nowadays UHF refers to frequencies of between 300MHz and 3GHz. UHF Series - "Ultra-High Frequency" connectors are the oldest, and least expensive, of RF connector designs. Unlike most other connectors, they can be used with both small-diameter (0.185 inch) and large diameter (0.630 inch) cables, and also with twin-center conductor cables. They have non-constant impedance and give satisfactory performance up to 200 mega-hertz and 500 volts peak. This series has a threaded coupling.
Optional reducing adapters accommodate a wide range of popular coaxial cables including RG58, LMR 240, and others. We offer UHF connectors in both crimp and solder versions.
UHF SERIES Plugs
| Cable Group | Nemal P/N | Dimensions (IN) | Tooling | Notes |
| RG 8, 9, 11, 13, 213, 214, 216 | PL 259 PL 259T PL 259TS | 1.50 1.50 0.72 0.72 1.50 0.72 | - - - | - Teflon Insulation Silver/Teflon |
| RG 8, 11, 213 | NE 5010 NE 5020 | 1.31 0.75 1.37 0.70 | 13 13 | Crimp Teflon-Crimp |
| RG 8X | NE 500 | 1.62 0.72 | 59 | Crimp (3 Pc.) |
| RG 11 | NE 5030 | 1.39 0.72 | 13 | Crimp |
| RG 58, 141 | NE 5040 NE 5050 UG 203 | 1.39 0.72 1.37 0.70 1.56 0.70 | 58 58 - | Crimp Teflon-Crimp Set Screw |
| RG 59, 62 | NE 5060 NE 530 | 1.39 0.72 1.63 0.70 | 59 - | Crimp Twist-On |
| 0.141 Semi-Rigid RG 402 | NE 5070 | 1.37 0.70 | 28 | Crimp |
Jacks and Receptacles
| Nemal P/N | Dimensions (IN) | Tooling | Notes |
| NE 540 | 1.50 0.64 | - | Crimp Jack RG 58 |
| SO 239 | 1.06 1.00 | - | Panel Mount |
| SO 239T | 1.06 1.00 | - | Teflon Insulation |
| SO 239SH | 1.06 0.75 | - | Bulkhead Mount |
In Series Adapters and Accessories
| Nemal P/N | Dimensions (IN) | Notes |
| NE 5310 | 1.94 0.72 | Plug-Plug |
| M 358 | 1.62 1.20 | “T” 2 Jack, 1 Plug |
| M 359 | 1.82 1.18 | Elbow Plug-Jack |
| M 359T | 1.82 1.18 | Elbow-Teflon |
| PL 258 | 1.12 0.62 | Jack-Jack |
| PL 258T | 1.12 0.62 | Teflon Jack-Jack |
| UG 106 | 0.75 0.345 | Hood RG 8, 213 |
| UG 175 | 1.00 0.209 | Reducer RG 58 |
| UG 175S | 1.00 0.209 | Silverplate |
| UG 176 | 1.00 0.257 | Reducer RG 59/62/8x |
| UG 176S | 1.00 0.257 | Silverplate |
| UG 177 | 0.75 0.155 | Hood RG 58, 141 |
| UG 363 | 2.00 0.62 | Bulkhead Feedthru |