N Male for 1/2" RFS LCF-12/Heliax LDF4 50 Ohm RF Transmission Cable
Nemal Electronics
NM-LCF12-C02 is a Type N male for 1/2" 50 Ohm RF Transmission cable.. Nemal stocks a complete line of Type N, UHF, DIN, and EIA connectors for 1/2", 7/8", and 1-1/4" Andrews and RFS Cablewave hardline
| General Specifications | |
| Interface | N Male |
| Body Style | Straight |
| Brand | RFS Cablewave |
| Mounting Angle | Straight |
|
|
|
| Electrical Specifications | |
| Connector Impedance | 50 ohm |
| Operating Frequency Band | 0 – 12000 MHz |
| Cable Impedance | 50 ohm |
| 3rd Order IMD, typical | -120 dBm @ 910 MHz |
| 3rd Order IMD Test Method | Two +43 dBm carriers |
| RF Operating Voltage, maximum (vrms) | 707.00 V |
| dc Test Voltage | 2000 V |
| Outer Contact Resistance, maximum | 0.30 mOhm |
| Inner Contact Resistance, maximum | 2.00 mOhm |
| Insulation Resistance, minimum | 5000 MOhm |
| Average Power | 0.6 kW @ 900 MHz |
| Peak Power, maximum | 10.00 kW |
Insertion Loss, typical 
|
0.05 dB |
| Shielding Effectiveness | -110 dB |
|
|
|
| Outline Drawing | |
 Click on image below to enlarge.
|
|
|
|
|
| Mechanical Specifications | |
| Outer Contact Attachment Method | Crush-flare |
| Inner Contact Attachment Method | Captivated |
| Outer Contact Plating | Unplated |
| Inner Contact Plating | Silver |
| Attachment Durability | 25 cycles |
| Interface Durability | 500 cycles |
| Interface Durability Method | IEC 61169-16:9.5 |
| Connector Retention Tensile Force | 890 N | 200 lbf |
| Connector Retention Torque | 5.42 N-m | 48.00 in lb |
| Insertion Force | 66.72 N | 15.00 lbf |
| Insertion Force Method | MIL-C-39012C-3.12, 4.6.9 |
| Pressurizable | No |
| Coupling Nut Proof Torque | 4.52 N-m | 40.00 in lb |
| Coupling Nut Retention Force | 444.82 N | 100.00 lbf |
| Coupling Nut Retention Force Method | MIL-C-39012C-3.25, 4.6.22 |
|
|
|
| Dimensions | |
| Nominal Size | 1/2 in |
| Diameter | 23.62 mm | 0.93 in |
| Length | 53.98 mm | 2.13 in |
| Weight | 90.72 g | 0.20 lb |
|
|
|
| Environmental Specifications | |
| Operating Temperature | -55 °C to +85 °C (-67 °F to +185 °F) |
| Storage Temperature | -55 °C to +85 °C (-67 °F to +185 °F) |
|
Immersion Depth
|
1 m |
| Immersion Test Mating | Mated |
| Immersion Test Method | IEC 60529:2001, IP68 |
| Water Jetting Test Mating | Mated |
| Water Jetting Test Method | IEC 60529:2001, IP66 |
| Moisture Resistance Test Method | MIL-STD-202F, Method 106F |
| Mechanical Shock Test Method | MIL-STD-202F, Method 213B, Test Condition C |
| Thermal Shock Test Method | MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C |
| Vibration Test Method | MIL-STD-202F, Method 204D, Test Condition B |
| Corrosion Test Method | MIL-STD-1344A, Method 1001.1, Test Condition A |
|
|
|
| Standard Conditions | |
| Attenuation, Ambient Temperature | 20 °C | 68 °F |
| Average Power, Ambient Temperature | 40 °C | 104 °F |
Return Loss/VSWR
| Frequency Band | VSWR | Return Loss (dB) |
| 0–1000 MHz | 1.03 | 36.00 |
| 1000–2000 MHz | 1.04 | 35.00 |
| 2000–3000 MHz | 1.08 | 28.00 |
|
|
|
We manufacture custom assemblies, patch cords, and adapters to order, usually within 48 hours.
*These connector series are all available in cable and panel mount plugs and jacks, receptacles, and in-series adapters.
