Home / MHV/SHV/High Voltage Connectors

MHV/SHV/High Voltage Connectors

MHV, SHV AND HIGH VOLTAGE CONNECTORS

Miniature high voltage connectors in either bayonet or push-pull constructions for NIM/CAMAC and instrumentation applications.

Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required

RF AND MICROWAVE

We design and manufacture RF solutions for broadcast and wireless networks.

Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required

In addition to our large inventory of standard products, we can design and manufacture MHV, SHV, and High Voltage connectors, adapters, and cable assemblies to your project's specific requirements in either prototype or production quantities. You can purchase the more common varieties on our website or contact us by filling out the form on this page or by giving us a call at (800) 522-2253.

MHV Connectors

The MHV connector is a bayonet locking interconnects used for high voltage applications up to 5000 volts (typically rated for 1500 RMS continuous and 5,000-volt peak, and 3 ampere). It is suitable for low frequency applications, up to approximately 300 MHz. The MHV Series is a good option for applications requiring voltages beyond the rating of typical BNC connectors. MHV connectors conform to MIL-STD-348.

SHV Connectors

The SHV connector (Safe High Voltage) is a RF connector that fulfills the same purpose as the MHV connector, but due to its extended insulator design, is considered to be safer to operate while disconnected. Another significant safety feature of the SHV connector is that when disconnected, the high-voltage contract is broken before the ground voltage. SHV connectors are rated for up to 5000 volts DC and 5 amperes.

NIM/CAMAC Connectors

Low profile, high density connector used for delay lines in nuclear research and testing applications including Kings and LEMO ® versions.

MHV SERIES

Cable Group Nemal P/N Figure Number Dimensions A and B (in) Tooling Notes

RG 58, 141

NE 1010

N/S

1.50

0.56

Crimp Plug

58

RG 59, 62, 210

NE 1020

N/S

1.50

0.56

Crimp Plug

59

-

UG 931

4

1.34

0.69

Panel Recept.

-

RG 59, 62, 71, 210

UG 932A

UG 961A

UG 1016A

1

3

2

1.54

1.48

1.47

0.56

0.77

0.50

Plug

Panel Jack

Jack

-

-

-

RG 58, 142, 223

NE 1015

1

1.54

0.56

Plug

-

-

NE 1080

4

1.06

0.62

Bulkhead Rec.

-

-

NE 1050

N/S

1.50

0.69

J-J Panel Mt.

-
  • Frequency Range: DC-50 MHz
  • Impedance: Non-Constant
  • Voltage Rating: 5000 V Peak
  • Current Rating: 5 Amp. Max.
  • Base Metal:
    • Body: Brass
    • Contact: M-Brass, F-Beryllium Copper
  • Plating: Silver / Nickel
  • Insulator: Teflon
  • Temperature Range: -55 C to +199 C
  • Mating: 2 Stud Bayonet

SHV SERIES

Cable Group Nemal P/N Figure Number Dimensions A and B (in) Tooling Notes

-

NE 1200

1

1.79

0.69

-

Bulkhead Receptacle

RG 59, 62

NE 1030

2

1.83

0.56

61

Crimp Plug

RG 58

NE 1040

NE 1210

2

3

1.83

1.79

0.56

0.69

57

-

Crimp Plug

Panel Receptacle

-

NE 1300

4

1.99

0.69

-

Panel Fd.thru P-P

-

NE 1310

5

1.10

1.39

-

“T” P-J-P

-

NE 1320

6

1.99

0.44

-

Plug-Plug

-

NE 1330

7

1.59

1.39

-

Elbow J-P
  • Voltage Rating:
    • Operating: 3,500 VAC; Test: 5,000 VAC
    • Operating: 5,000 VAC; Test: 10,000 VAC
  • Base Metal:
    • Body & Male Contact - Brass
    • Female Contact - Beryllium Copper
  • Plating:
    • Body - Nickel
    • Contacts - Gold
  • Insulator: Teflon
  • Mating: Bayonet - 2 Stud