TACTICAL SMPTE CAMERA CABLE


NEWLY REDESIGNED TACTICAL SMPTE CAMERA CABLE FOR EXTREME AND HOSTILE ENVIRONMENTS.

Reliably use SMPTE cable in environments previously too extreme or hostile, and in applications restricted by size, weight, and distance.

EXTREME FLEXIBILITY

With a bending radius of less than 1 inch, FOCC25T can tolerate repeated tight bends, knots, and pulls without any impact on performance.

In fact, you can make a direct 180-degree bend and not lose signal. As a result of redesigning the central strength member, FOCC25T is not susceptible to the kinking issues of standard SMPTE cables. This also eliminates a major cause of shortened cable service life as it is not possible to repair cables after damage to the central strength member.

LONG DISTANCES AT AMPLE BANDWIDTH

The Tactical SMPTE cable 2 tactical single-mode fibers and 4 copper conductors provides more than ample bandwidth capability and minimal attenuation (0.5db per km) for seamless transmission of 3G/HD/UHD and 12K video signals over distances well in excess of 1 km.

This makes it ideal for use not only in SMPTE camera applications, but also in a wide range of applications requiring fiber plus copper.

The cable’s electrical conductors will easily support typical camera power on runs of up to 2,000 feet (600 meters) or more, depending on specific camera power requirements. The new FOCC25T cable features extremely rugged tactical fiber, a proprietary flexible strength member, and an extra durable polyurethane jacket.

THINNER, LIGHTER, EASIER TO CARRY

By reducing the diameter 9%, users can fit longer lengths on standard reelers with adequate headroom. The 15% weight reduction, as compared to standard 9mm SMPTE cable.

This offers a substantial advantage when used in weight limited vehicles, allowing for more practical storing and transporting, as well as providing ease of movement to the personnel moving the equipment through rugged locations.

TECHNICAL SPECIFICATIONS

SMPTE 311 Hybrid Fiber Camera Cable. NEMAL FOCC25T is designed for general purpose use, indoor or outdoor, and in installations requiring a UL Riser approval. Use Nemal break-out kits and SMPTE interconnect panels for termination at each end.

Part Number: FOCC25T-Tactical SMPTE Fiber Camera Cable

Product Specifications

  • 2-single mode 9/125 fibers, bend tolerant, 2mm jacket (blue, yellow)
  • 3-18 awg power conductors (white, black, green)
  • 2-24 awg data/signal conductors (grey, red)
  • Aramid Fillers and Proprietary Nemal Strength Members
  • Overall Black Polyurethane Jacket

Jacket Specifications

  • Tensile Strength: 5500 PSI
  • Elongation Spec: 650%
  • Tear Resistance: 95kN/m (ISO34-1B)
  • ESD Properties: >104 and <1011 ohms surface resistance
  • Abrasion Resistance Taber ASTM D-3389: .0008oz/1000rev

FOCC25T

Part Number: FOCC24R-WB-Water blocked SMPTE Fiber Camera Cable-Riser Rated

NEW: Water Blocked Riser Rated SMPTE Camera Cable

Nemal FOCC24R-WB offers substantial savings in cost and installation time for applications requiring a Riser Rated cable as well as one suitable for use in wet environments.

Product Specifications

  • 2-single mode 9/125 fibers, bend tolerant, 2mm jacket (blue, yellow)

  • 4-20 awg power conductors (2-black, 2-white, used in pairs as 2 conductors)

  • 2-24 awg data/signal conductors (grey, red)

  • Aramid Strength Members

  • Water Blocking tape

  • Shielding: tinned copper braid

  • Overall PVC Jacket, Riser Rated UL CMR-OF

FIBER TYPE INSERTION LOSS DATA CONDUCTORS POWER CONDUCTORS NOM. OD OUTER JACKET WEIGHT MIN REC BEND RADIUS

2-SM 9/125 Bend tolerant,
2mm jacket

0.80 db/km Max

2-24 awg (7/32) TC
.010” HDPE
27.7 Ohms/M

3-18 awg (16/30) TC
.016” HDPE
6.92 Ohms/M

.337”
(8.5mm)

Polyurethane

60lbs/M
90kg/km

3.3”, 91mm

SUGGESTED CONNECTORS

LEMO®

  • FUW.3K.93C

    PUW.3K.93C

DO YOU HAVE A PENDING PROJECT OR NEED JUST ONE PIECE?

SEND US A NOTE

Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required
Thanks!
This field is required
This field is required
This field is required
This field is required
This field is required

Prefer to reach someone right now?
Chat with one of our reps or call us at (800) 522-2253, Monday to Friday, from 8am to 6pm EST. Call (305) 899-0900 if you're in the United States.

These companies have trusted Nemal Electronics International with their cabling and connectivity needs.